- To be applied only on earthenware/low fire bisque
- Using 2-3 coats to achieve desired coverage. Wait for coat to dry between applications
- Colors are intermixable
- Will bleed at inter-color interface
- Firing range between Cone 07 (984°C) – Cone 03 (1,101°C)
- Finish: Opaque
- Appropriate for functional ware (food safe) provided entire piece is covered in SG, has been fired correctly and used on compatible earthenware clay
- Powder Ratio: 1kg powder : 1.14kg of clean water. Seive through 200# mesh. Ensure to batch test and adjust as required
Superior Glazes – White
Our “Superior Glazes” are our gloss glazes which are a non-toxic, effective and an economic way to cover large areas where one color is being used. They are classified in three ways to indicate finished coverage: Opaque, Semi-Transparent, and Transparent. This glaze is available in powder and liquid form.
Chrysanthos Superior Glazes add color and gloss to ceramic ware in a single step. A large range of colors are available, they are all lead-free and depending on the color are translucent, semi-opaque or opaque in their coverage. They provide a beautiful and practical means of giving solid color coverage to broad areas or for highlighting decorative or incised ware.
Superior Glazes are for application to earthenware bisque and when fired correctly will seal and protect the ceramic ware from moisture and discoloration caused by contact with food and liquids.
Depending on the firing temperature two or three full coats required to achieve the best results. These are carefully applied at right angles to one another (ie. crosshatched), allowing each to dry in-between. A soft glazing brush should be used in order to minimise streaking. Besides brushing, Superior Glazes may also be sponged.
Superior Glazes are suitable for use in controlled glaze effects, for majolica techniques and are overglaze compatible.
Superior Glazes may be sprayed and thinned with clean water if necessary to improve glaze flow.
Chrysanthos Superior Glaze codes are suffixed by an opacity indicator “O” for opaque; “S” for semi-transparent and “T” for transparent.
Superior Glazes may be intermixed however it is not advised to mix Superior Glazes with Hobby Leaded Glaze as they are incompatible and the result will not be food-safe.
Superior Glazes are specifically formulated for application onto low fire earthenware clay that has been bisque fired between cone 04 (1,060°C) and cone 03 (1,101°C) then gloss fired to between cone 07 (984°C) and cone 03 (1,101°C).
1 kg, 500 gr, 140 mL, 500 mL, 5 L
1 review for Superior Glazes – White